1. 全國咨詢服務熱線:400-6700-720 / 020-38937005

      熱門關鍵詞: GELOY PC/ASA HRA222 cycoloy pc/abs-XCY620-BK1005 Victrex PEEK 450CA30

      當前位置:主頁 > 產品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

      cycoloy pc/abs-CH6410-701

      2015-12-16 14:59

      Cycoloy PC/ABS CH6410-701

      CH6410是高熱量,沖擊改良PC樹脂.無溴無氯阻燃,有顏色限制.

      Property
       
      TYPICAL PROPERTIES (1)
      MECHANICAL
      Value Unit Standard
      Tensile Stress, yld, Type I, 50 mm/min
      640
      kgf/cm²
      ASTM D 638
      Tensile Stress, brk, Type I, 50 mm/min
      550
      kgf/cm²
      ASTM D 638
      Tensile Strain, yld, Type I, 50 mm/min
      5.5
      %
      ASTM D 638
      Tensile Strain, brk, Type I, 50 mm/min
      88
      %
      ASTM D 638
      Tensile Modulus, 50 mm/min
      25900
      kgf/cm²
      ASTM D 638
      Flexural Stress, yld, 1.3 mm/min, 50 mm span
      970
      kgf/cm²
      ASTM D 790
      Flexural Modulus, 1.3 mm/min, 50 mm span
      26500
      kgf/cm²
      ASTM D 790
      Tensile Stress, yield, 50 mm/min
      63
      MPa
      ISO 527
      Tensile Stress, break, 50 mm/min
      55
      MPa
      ISO 527
      Tensile Strain, yield, 50 mm/min
      5
      %
      ISO 527
      Tensile Strain, break, 50 mm/min
      95
      %
      ISO 527
      Tensile Modulus, 1 mm/min
      2300
      MPa
      ISO 527
      Flexural Stress, yield, 2 mm/min
      90
      MPa
      ISO 178
      Flexural Modulus, 2 mm/min
      2400
      MPa
      ISO 178
      Hardness, H358/30
      100
      MPa
      ISO 2039-1
      IMPACT
      Value Unit Standard
      Izod Impact, notched, 23°C
      92
      cm-kgf/cm
      ASTM D 256
      Instrumented Impact Total Energy, 23°C
      740
      cm-kgf
      ASTM D 3763
      Izod Impact, notched 80*10*4 +23°C
      50
      kJ/m²
      ISO 180/1A
      Izod Impact, notched 80*10*4 0°C
      19
      kJ/m²
      ISO 180/1A
      Izod Impact, notched 80*10*4 -30°C
      15
      kJ/m²
      ISO 180/1A
      Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm
      55
      kJ/m²
      ISO 179/1eA
      Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm
      15
      kJ/m²
      ISO 179/1eA
      THERMAL
      Value Unit Standard
      HDT, 0.45 MPa, 3.2 mm, unannealed
      127
      °C
      ASTM D 648
      HDT, 1.82 MPa, 3.2mm, unannealed
      118
      °C
      ASTM D 648
      CTE, -40°C to 40°C, flow
      7.74E-05
      1/°C
      ASTM E 831
      CTE, -40°C to 40°C, xflow
      5.94E-05
      1/°C
      ASTM E 831
      CTE, 23°C to 60°C, flow
      7.E-05
      1/°C
      ISO 11359-2
      CTE, 23°C to 60°C, xflow
      7.E-05
      1/°C
      ISO 11359-2
      Ball Pressure Test, 125°C +/- 2°C
      PASSES
      -
      IEC 60695-10-2
      Vicat Softening Temp, Rate B/50
      134
      °C
      ISO 306
      Vicat Softening Temp, Rate B/120
      135
      °C
      ISO 306
      HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
      126
      °C
      ISO 75/Be
      HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
      113
      °C
      ISO 75/Ae
      PHYSICAL
      Value Unit Standard
      Specific Gravity
      1.19
      -
      ASTM D 792
      Mold Shrinkage on Tensile Bar, flow (2)
      0.05 - 0.07
      %
      SABIC Method
      Mold Shrinkage, flow, 3.2 mm
      0.4 - 0.5
      %
      SABIC Method
      Melt Flow Rate, 260°C/2.16 kgf
      6.3
      g/10 min
      ASTM D 1238
      Density
      1.2
      g/cm³
      ISO 1183
      Melt Volume Rate, MVR at 260°C/5.0 kg
      16
      cm³/10 min
      ISO 1133
      ELECTRICAL
      Value Unit Standard
      Volume Resistivity
      >1.E+15
      Ohm-cm
      IEC 60093
      Surface Resistivity, ROA
      >1.E+15
      Ohm
      IEC 60093
      Dielectric Strength, in oil, 3.2 mm
      18
      kV/mm
      IEC 60243-1
      Relative Permittivity, 50/60 Hz
      2.7
      -
      IEC 60250
      Relative Permittivity, 1 MHz
      2.7
      -
      IEC 60250
      Dissipation Factor, 50/60 Hz
      0.001
      -
      IEC 60250
      Dissipation Factor, 1 MHz
      0.01
      -
      IEC 60250
      Comparative Tracking Index
      225
      V
      IEC 60112
      FLAME CHARACTERISTICS
      Value Unit Standard
      UL Recognized, 94V-1 Flame Class Rating (3)
      0.99
      mm
      UL 94
      UL Recognized, 94V-0 Flame Class Rating (3)
      1.49
      mm
      UL 94
       
      Parameter
      Injection Molding
      Value Unit
      Drying Temperature
      90 - 100
      °C
      Drying Time
      2 - 4
      hrs
      Drying Time (Cumulative)
      8
      hrs
      Maximum Moisture Content
      0.04
      %
      Melt Temperature
      270 - 300
      °C
      Nozzle Temperature
      265 - 300
      °C
      Front - Zone 3 Temperature
      265 - 300
      °C
      Middle - Zone 2 Temperature
      260 - 300
      °C
      Rear - Zone 1 Temperature
      260 - 300
      °C
      Mold Temperature
      60 - 90
      °C
      Back Pressure
      0.3 - 0.7
      MPa
      Screw Speed
      40 - 70
      rpm
      Shot to Cylinder Size
      40 - 80
      %
      Vent Depth
      0.038 - 0.076
      mm

      與塑擎合作

      您將會得到更成熟專業的工程塑料供應服務。我們以客戶至上,同時也積極挑戰,力求呈現最好的服務質量給廣大客戶。

      工程塑料熱線:

      400-6700-720
      020-38937005

      關于塑擎:
      亚洲黄色视频,奇米影视777四色狠狠,三级黄色片,好吊色永久免费视频,另类小说 色综合网站